GENERAL USE
Directions: Shake Well. Test on hidden area for color fastness. Remove excess soil and waste matter. Saturate source with Public Defender PD-100. Work solution into surface with clean cloth or brush. Allow to dry.
Reapply if needed. Product good for 90 days.
For General Use: (household odors & stains): mix 1 part product with 20
parts warm water.
For Severe Use: (skunk odors): mix 1 part product with 10 parts warm water.
For Carpet Cleaning: mix 1 part product with 64 parts warm water.
For Stubborn Stains: keep area moist by covering with a damp towel until
odor or stain is gone, let dry & clean as usual.
For Convenience: Use product full strength.
Use mix within 48 hours. Do not add other chemicals.
SAFETY: Public Defender PD-100 is safe when used as directed; like all
biotechnology products, keep out of eyes and children's reach. DO NOT
SWALLOW!
Storage: For maximum life, store between 40ºF (5ºC) and 120ºF (49ºC).
Including:
Carpet Cleaning - Rooftop Units - Restrooms - Mildew - Cigarette Smoke -
Health Clubs - Bar Service Areas
To remove excess stains or heavy soil
Soak up excess stain with a cloth. Do not dry the stain completely or it may
set.
Follow Directions.
Allow solution to work into stain. Using quick, light strokes, brush stain
with a soft-bristle brush. Work from outside toward the center to prevent
rings. Avoid vigorous rubbing which may damage the nap or force the stain
more deeply into the material.
Soak up remaining solution and sponge the fabric with cool water. Allow
fabric to dry completely, then vacuum thoroughly.
If stain is still evident, repeat procedure. Several light applications of
solution are more effective and less damaging than one heavy application.
An Effective Spotter and Carpet Cleaner
Add
PD-100 Remover to warm water in spray bottle. 10 to 1
mixture for heavy spot cleaning, 20 to 1 for normal carpet cleaning.
Apply
to carpet with spray applicator.
Towel
or brush to loosen carpet fibers.
Add
1 part PD-100 to 64 parts water and use in carpet extractor cleaning
machine.
Use PD-100 on rooftop units.
Add
1 part PD-100 to 10 parts warm water in a 1 to 3 gallon wand-type sprayer.
Spray PD-100 directly on air conditioning coils, cooling tower and in
drain openings.
*Digests mold, mildews, and odors that can accumulate in these tight areas.
Treat as needed.
Use PD-100 on grout in guest and public restrooms.
Add
1 part PD-100 to 10 parts warm water in spray Bottle.
Spray PD-100 in public restrooms where stains appear on grout.
Work-in
with stiff bristle brush for faster results.
Spray
again every few days to prevent mildew and urine odors.
PD-100 gets rid of black mildew in bathrooms.
Add
1 part PD-100 to 10 parts warm water in spray bottle.
Spray
PD-100 on surface.
Let
stand, wipe residue with towel.
Spray
PD-100 again every few days to prevent black mildew from appearing again.
Gets rid of cigarette smoke, cigar smoke, mildew and other odors.
Add
1 part PD-100 to 20 parts warm water in
spray bottle.
Spray
mixture in a uniform, overlapping pattern on carpet, drapes, furniture, and
walls. Spray on bathroom and shower curtain.
All surfaces sprayed should fell slightly
damp to the touch.
Use PD-100 in health club facilities.
Add
1 part PD-100 to 5 to 10 parts warm water in spray bottle.
Spray
PD-100 on exercise equipment to eliminate perspiration, creams, oils grease
and related odors.
Spray inside lockers and dressing rooms.
Spray showers and bathrooms to eliminate fungus, mildew and odors.
BAR AND LOUNGE AREA - STAIN REMOVER
eliminates smoke odors in service bar.
1.
Add 1 part PD-100 to 20 parts warm water in 1to 3 gallon wand-type sprayer.
2.
Spray mixture in a uniform, overlapping patter on carpet, upholstery, drapes
and walls.
3.
All surfaces sprayed should feel
slightly damp to the touch.
BAR SERVICE AREAS - Cleans Service bar areas.
1.
Add 1 part PD-100to 20 parts warm water in
spray bottle.
2.
Spray PD-100 & STAIN REMOVER in and around mixing
units to eliminate spilled liquor and mixing sodas in hard to reach areas.
3.
Spray PD-100 in trash cans and around storage areas.